Grippers

Angular Grippers – Series CGA

This gripper is ideal for use in applications requiring angular gripping. The gripper open and closes at angles between -10° to +30°. It has mounting holes on three sides which provides flexibility in installation. Proximity switches can be inserted in the U-shaped grooves on the body in order to detect whether the gripper is in an open or closed position.

Bore sizes: Ø 10, 16, 20, 25, 32 mm

Type of operation: Double-acting

Operating pressure: 1.5 to 7 bar

Operating temperature: 0 to 80°C

Max. operating frequency:180 cycles/min

Lubrication: Lever section, lubrication required on sliding section

Lever open / closed angles: –10° to +30°

Magnet: Magnet for proximity sensors in piston

 

180° Angular Grippers – Series CGS

Fingers open 180° in order to enable the gripper to pass certain areas without colliding with other elements. In this way it may be possible to reduce the number of movements in a working sequence. A link mechanism provides high gripping force. The piston is equipped with a permanent magnet for the use of magnetic proximity switches. The gripper has mounting holes on three sides which provides flexibility in installation.

Bore sizes: 16, 20, 25, 32 mm

Type of operation: Double-acting

Operating pressure: 1.5 bar to 7 bar

Operating temperature: 0°C to 80°C

Max. operating frequency: 60 cycles/min

Lubrication: Lever section, lubrication required on sliding section

Lever open/close angles: -1°C to +186°C

Repeatability: +/- 0.2 mm

 

Parallel Grippers – Series CGP

Compact design that has a high gripping force and is highly durable. The closing action of the gripper is generated from the cylinder’s thrust side, resulting in a higher gripping force. The gripper is equipped with ring bearings in the sliding section for high durability. The CGP has mounting holes on three sides which provides flexibility in installation. Proximity switches can be inserted in the U-shaped grooves on the body in order to detect whether the gripper is in an open or closed position.

Bore sizes: Ø 10, 16, 20, 25, 32 mm

Type of operation: Double-acting

Operating pressure: 1.5 to 7 bar

Operating temperature: 0°C to 80°C

Max. operating frequency: 180 cycles/min

Lubrication: Lever section, lubrication required on sliding section

 

Guided Parallel Grippers – Series CGB-L

The guided mechanism allows for high repeatability. The closing action of the gripper is generated from the cylinder’s thrust side, resulting in a higher gripping force. Proximity switches can be inserted in the U-shaped grooves on the body in order to detect whether the gripper is in an open or closed position. The gripper has mounting holes on three sides which provides flexibility in installation.

Bore sizes: Ø16, 20, 25, 32 mm

Type of operation: Double-acting, parallel type

Operating pressure: 1.5 to 7 bar

Operating temperature: 0°C to 80°C

Max. operating frequency: 180 cycles/min

Lubrication: Lever section, lubrication required on sliding section

Repeatability: +/- 0.01 mm

 

Wide Opening Parallel Grippers – Series CGL

Ideal for handling wide components of various sizes due to the relatively long stroke of the fingers. The grippers are equipped with rod with rod wipers to protect against dust, prolonging the life of the gripper. The compact and versatile design offers great freedom of mounting. Proximity switches can be inserted in the C-shaped grooves on the body in order to detect whether the gripper is in an open or closed position.

Bore sizes: Ø 10, 16, 20, 25, 32mm

Type of operation: Double-acting, parallel type

Operating pressure: 1.5 to 7 bar

Operating temperature: 0°C to 60°C

Max. operating frequency: 40 cycles/min

Repeatability: +/- 0.1mm

 

3-Finger Grippers – Series CGC

Ideal for gripping spheres or components with circular faces. Compact design that allows the combination of a high gripping force and long stroke. The piston is equipped with a permanent magnet for the use of magnetic proximity switches. The proximity switches can be inserted in the U-shaped grooves on the body in order to detect whether the gripper is in an open or closed position.

Bore sizes: Ø 32, 45, 58, 77, 98 mm

Type of operation: Double-acting

Materials:

  • Housing: High tensile special hard-coated aluminium alloy
  • Functional parts: Hardened steel

Operating pressure: 2 to 7 bar

Operating temperature: 5°C to 60°C

Repeatability: +/- 0.05 mm

Max. operating frequency: 60 cycles/min

Lubrication: Lever section, lubrication required on sliding section

No products were found matching your selection.