Metal Flow Control

Series SCU – MCU – SVU – MVU – SCO – MCO

These unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible to choose the most suitable system in relation what size tube is already available. Only the G1/2″ model is supplied complete with banjo flow controllers.

Construction: Needle type

Valve group: Unidirectional and bidirectional controller

Materials

  • Body and regulation screw: M5 = stainless steel; 1/8″,1/4″, 3/8″ or 1/2″ = brass (OT)
  • Seals: NBR

Mounting: By male thread

Ports: M5, G1/8″, G1/4″, G3/8″, G1/2″

Operating temperature: 0°C to 80°C (with dry air -20°C)

Operating pressure: 1 to 10 bar

Series GSCU – GMCU – GSVU – GMVU – GSCO – GMCO

These unidirectional and bidirectional flow controllers have been designed as small as possible to enable mounting directly on valves or cylinders. The flow regulation range is wide and gradual, allowing the regulation to be very accurate either at minimum or maximum flow.

Construction: Needle type

Valve group: Unidirectional and bidirectional controller

Materials

Body and screws: M5 – Stainless steel; 1/8″, 1/4″, 3/8″, 1/2″ brass (OT58)

Seals: NBR

Mounting: By male threaded

Operating temperature: 0°C to 80°C (with dry air -20°C)

Operating pressure: 1 to 10 bar

No products were found matching your selection.