Ancilliary Functions
Lockable Isolation 3/2-way Valve
Series MX
The lockable isolation valves are available in an electro-pneumatic, pneumatic andmanual versions and are designed to block the air inlet of the FRL (filter, regulator, lubricator) unit and so pressurise and depressurise the equipment.
Positioning of these valves is often before the FRL unit. The lockable isolation valves are available with G1/4″, G3/8″ or G1/2″ ports and can be panel mounted.
Construction: Modular compact, poppet-type
Materials: Zama, NBR, technopolymer
Ports: G1/4″, G3/8″, G1/2″
Mounting: In- line, wall or panel mounting (in any position)
Operating temperature: 0°C to 50°C
Operating pressure: 2 to 10 Bar
Soft Start Valve
Series MX
The Series MX soft start valve is used to avoid injuring people or damaging equipment when pressurising pneumatic systems containing cylinders. The features of these components allow equipment to be pressurised up to 50% of the indicated pressure, after which 100% is reached rapidly. The usual location of the soft start valve is after the FRL (filter, regulator, lubricator) unit; the modular design allows for perfect adaptability with all Series MX.
A pressure switch can be mounted into the upper part of the unit after removal of the S2610 G1/8″ plug. An electrical or pneumatic 3 way valve should be installed before the unit to allow depressurisation.
Construction: Modular, compact, poppet type
Materials: Zama, NBR, technopolymer
Ports: G1/4″, G3/8″, G1/2″
Mounting: In-line, wall or panel mounting (in any position)
Operating temperature: 0°C to 50°C
Operating pressure: 2 to 10 bar
Manifold Pressure Regulators
Series MX
Air pressure regulators control pressure in air lines to remove fluctuations and maintain consistent pressure for pneumatic devices. The manifold pressure regulators are available with a G1/4″ port. The standard regulator has a relieving diaphragm.
Construction: Compact modular, diaphragm type
Materials: Zama, NBR, technopolymer
Port: G1/4″
Pressure gauge ports / outlet: G1/8″
Mounting: In-line, wall or panel mounting (in any position)
Operating temperature: 0°C to 50°C
Inlet pressure: 0 to 16 bar
Outlet pressure: 0.5 to 10 bar or 0 to 4 bar
Secondary pressure relieving: Standard
Take-off Blocks
Series MX
The take-off blocks when equipped with a no return valve, allow the use of non lubricated air and should be inserted between the regulator and the lubricator. If mounted as the last element, they should be assembled with terminal flanges.
Construction: Modular, compact, diaphragm type
Materials: Zama, NBR, technopolymer
Ports: G1/4″, G1/2″
Pressure gauge ports / outlet: G1/4″, G1/2″
Mounting: In-line, wall or panel mounting (in any position)
Operating temperature: 0°C to 50°C
Operating pressure: 0 to 16 bar
No products were found matching your selection.